RigiFloat Modular Floating Platform Configurator

1

Platform Requirements

RFQ project-basis inputs are displayed from your linked RFQ record.

RFQ Reference Automatically linked to your current RFQ. Project Name * Controlled by RFQ Level 2 when this configurator is opened from an RFQ. Application * Target Length (m) * RFQ Level 2 target. Maximum undersize allowance is 5%; oversize is minimized but not hard-capped. Target Width (m) * RFQ Level 2 target. Maximum undersize allowance is 5%; oversize is minimized but not hard-capped. Preferred Pontoon Depth * Target Payload (t) optional If unknown, leave blank. Allowable payload will be verified against the selected depth and operating conditions. Area of Use optional

Additional project requirements

Project Location Preferred Class Society Design Life (years) Design Wave Hs (m)

Ramp Spud / guide pile provision Bollards / mooring cleats Ladders / steps

2

Recommended RigiFloat Configuration

A preliminary configuration based on the linked RFQ Level 2 project basis.

Arrangement-

Actual Size-

RigiFloat Modules-

Preliminary Max Payload-

Dimensional Check-

Preliminary Platform Layout

CPS408x CPS208x IRPC locking key

Preliminary configuration for RFQ purposes. Final payload, structural strength, stability, mooring, local loads and class requirements are subject to engineering verification.

3

Configuration Saved for RFQ

The selected layout is stored as the client baseline for internal refinement.